Klarstein VERDON Bedienungsanleitung Seite 21

FINGERPRINT LOCK (10045663 & 10045665)
A Admin key and activating port for fingerprint lock
B Fingerprint sensor: Press your finger to identify yourself.
C LED status light: Blue light, red light and pink light
To create a fingerprint account for administrator 1:
Press your finger on the fingerprint sensor for 7 seconds. After the blue light
flashes 3 times, you can release your finger. Then the pink light will flash once,
signalling that the system is entering fingerprint enrolment status.
With your first fingerprint, you have defined yourself as an administrator. You
now need to have your fingerprint scanned 6 times in a row. To do this, press
the fingerprint sensor 6 times. The blue light flashes every time you press your
finger on the sensor. When the system has captured your fingerprint 6 times, the
blue light will illuminate for 2 seconds, indicating the first fingerprint entry was
successful. The fingerprint entry is then terminated.
Note: If the red light flashes during fingerprint scanning, the fingerprint has
not been scanned and you must continue scanning until 6 valid fingerprints are
enrolled.
To create a fingerprint account for administrator 2:
Proceed as for creating the administrator 1 account.
To create a fingerprint account for users 3-20:
Proceed as for creating the administrator 1 account.
EN
21