Kenwood KD-727 Bedienungsanleitung Seite 5

When an EP record is played back at a speed of 33-1/3
rpm, the speed of 45 rpm is automatically set by the
auto size selector after playback starts even if the speed
of 33-1/3 rpm _ is indicated first. After starting
playback, press the speed selector switch to set
33-1/3 rpm.
TURT ARLE KA7a7
Fig. 9
5. When playback ends, the tonearm automatically
returns to the rest position and the turntable platter
stops rotating. (Auto return operation)
6. When the play/cut switch (PLAY/CUT) is pressed
during playback, playback stops and the tonearm
automatically returns to the rest position and the
operation stops. (Auto cut operation)
Manual playback
1. Press the power switch (POWER).
2. Open the lid and place a record on the turntable plat-
ter.
3. Close the lid.
4. The tonearm moves right when the reverse switch
(m) is pressed, and left when the forward switch
(<4) is pressed. Operate these switches to make fine
adjustment, and move the tonearm to the required
position. ;
Fig. 10
5. Press the cueing switch (CUEING). Then, the
tonearm lowers onto the record and playback starts.
6..When playback ends, the tonearm automatically
returns to the rest position.
5 KD-727 (kK)
Suspend playback
To suspend playback, press the cueing switch (CUE-
ING), and the tonearm lifts.
To resume playback, press the cueing switch (CUEING)
again.
The tonearm lowers and playback starts from almost
the same position where it left off.
Fig. 11
Repeat playback
To repeat playback, press the repeat switch (REPEAT).
The REPEAT indicator lights and in the automatic
playback mode, one side of the record is repeatedly
played back.
To reset the repeat playback mode, press the repeat
switch (REPEAT) again. The REPEAT indicator goes off
and in the automatic playback mode, one side of the
record is played back to the last tune and the tonearm
returns to the rest position and the operation stops.
Note:—H—H— aii _
Repeat playback is not possible during manual playback. Do repeat
playback during automatic playback. If manual playback is performed
during automatic playback, the repeat playback mode is reset. When
the play/cut switch (PLAY/CUT) is pressed during repeat playback,
playback stops and the tonearm returns to the rest position and the
repeat playback mode is reset.
Fig. 12