Hunter Maverick TCR1 Serie Bedienungsanleitung Seite 9

In case of any warranty claim, it will be necessary to contact your local
authorized Hunter Service Representative. To have an item considered for
warranty, it must be returned to Hunter Engineering Company for inspection
and evaluation. This must be done on a freight prepaid basis. If after our
inspection the product proves to be defective, and is within the time frame
specified, we will repair or replace the item at no additional cost.
This is Hunter Engineering Company's only warranty with respect to new
equipment. Hunter Engineering Company disclaims all other warranties to the
extent permitted by law. This express warranty and any implied warranties of
merchantability and fitness for a particular purpose shall not extend beyond
the warranty period. Hunter Engineering Company is not responsible for any
incidental or consequential damages, including, but not limited to, loss of
business.
We do not authorize any person to assume for us any other liabilities with
our products. Any remaining warranty may be transferred to subsequent
purchasers by forwarding the purchaser's name, address, phone number and
equipment serial number to:
See our document library at www.Hunter.com for additional details.
Environmental Information Environmental Information
The following disposal procedure shall be exclusively applied to the machines
having the crossed-out bin symbol on their data plate.
This product may contain substances that can be hazardous to the
environment and to human health if it is not disposed of properly.
The following information is therefore provided to prevent the release of these
substances and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of in the usual
municipal waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and on this page, reminds
the user that the product must be disposed of properly at the end of its life.
In this way it is possible to prevent that a non specific treatment of the
substances contained in these products, or their improper use, or improper
use of their parts may be hazardous to the environment or to human health.
Furthermore, this helps to recover, recycle and reuse many of the materials
contained in these products.
Electrical and electronic manufacturers and distributors set up proper
collection and treatment systems for these products for this purpose.
At the end of the product's working life, contact your supplier for information
about disposal procedures. When you purchase this product, your supplier will
also inform you that you may return another worn-out appliance to him free of
charge, provided it is of the same type and has provided the same functions
as the product just purchased.
Any disposal of the product performed in a different way from that described
above will be liable to the penalties provided for by the national regulations in
force in the country where the product is disposed of.
Further measures for environmental protection are recommended: recycling
of the internal and external packaging of the product and proper disposal of
used batteries (only if contained in the product).
Your help is crucial in reducing the amount of natural resources used for
manufacturing electrical and electronic equipment, minimise the use of
landfills for product disposal and improve the quality of life, preventing
potentially hazardous substances from being released in the environment.
English
Image 8.
9