AEG BEE431011M Benutzerinformation Seite 10

5.3 Display
A B
6. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
6.1 Before first use
The oven can emit an odour and smoke during preheating. Make sure that the room is
ventilated.
Step 1
Set the clock
1. , - press to set the time.
After approximately 5 sec., the
flashing stops and the display
shows the time.
Turn off the oven and wait until it is cold. Place the accessories and the removable shelf supports in the oven.
7. DAILY USE
WARNING!
Refer to Safety chapters.
10 ENGLISH
A. Clock functions
B. Timer
Step 2
Clean the oven
1. Remove all accessories and re‐
movable shelf supports from
the oven.
2. Clean the oven and the acces‐
sories only with a microfibre
cloth, warm water and a mild
detergent.
7.1 How to set: Heating function
Step 1
Step 2
Step 3
Preheat the empty oven
1. Set the maximum temperature
for the function:
Time: 1 h.
2. Set the maximum temperature
for the function:
Time: 15 min.
3. Set the maximum temperature
for the function:
Time: 15 min.
Turn the knob for the heating functions
to select a heating function.
Turn the control knob to select the tem‐
perature .
.
.
.