Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note:
You must use the power adapter shipped along with the MFP Server,
do NOT use any other power adapter from other sources.
To prevent the compatibility problem between MFP Server and a few
MFP or printer, it is recommended that you power on the MFP Server
before the MFP or printer.
Software Installation
Before you start, you should check your computer's operating system. This
program can be run in Windows 2000 SP4 above and Windows XP SP1
above. Please follow the steps below to start installation. For the
installation procedures in Windows 98SE/ME/NT and other operating
systems, please refer to the manual of the MFP Server
Tip:
You have to uninstall all the MFP server drivers and utilities if you have
installed the previous version.
steps below to start MFP Utility installation.
1.
Insert the print server's Installation CD into the CD-ROM drive.
2.
Click "utility " from the Auto-Run menu screen.
Once executed, the Setup program will extract files to launch the InstallShield
Wizard; then, follow it step by step to complete the installation process and
begin to setup printer
after installation process have done, The "MFP Server Configuration"
screen is displayed. If you want to configure the MFP Server, please click
""Next" directly. Or you can select "No, I will configure the MFP Server
later" and click "Next" to complete the installation. The following steps are
for MFP Server Configuration
Multi-Function Printer Server
MFP-101U / WFP-101U
All manuals and user guides at all-guides.com
English
2
2
Werbung
