Filter Replacement & Cleaning - Bloomfold Bf010 Anweisungen Für Den Gebrauch

6. To manually change the wind speed press the speed button. Choose from:
Low speed
Mid speed
High speed
Sleepmode
In sleep mode, the product will operate on the softest setting with a lower
dB volume. The indicator light will dim and go out.
7. To use the timer function, press the timer button. Choose from:
2 hours
4 hours
6 hours
8 hours
After setting the timer, the product will switch off at the end of the selected
timer.
8. Turn on the ioniser setting by pressing the ioniser button once. Press
again to turn the function off.
Filter replacement & cleaning
1. The filter light will illuminate when the product is due for a new filter.
2. Replace the filter with a new Bloomfold H13 HEPA filter by opening the
bottom cover, removing the old filter and inserting the new filter. Close the
bottom closure after replacement.
3. Press the filter light for 3 seconds to reset the light.
4. It is recommended to vacuum the HEPA filter every 2 weeks to remove
excess dust. Do this carefully to avoid damage.
12.