Instructions Before Use; Getting Ready; User Manual - Bloomfold Bf010 Anweisungen Für Den Gebrauch

Instructions before use

1. Place the product in a ventilated area larger than 4m2 and leave at least 30
cm of ventilation space around the product.
2. Leave all ventilation holes free, do not block them.
3. Do not place the product near a bath, shower or standing water.
4. Place the product at least 1 metre away from a television

Getting ready

1. Open the bottom cover of the product to access the HEPA filter.
2. Remove the air filter packaging.
3. Put the air filter back into the product and close the bottom closure again.
How does the product work
1. The product sucks in contaminated air at the bottom through the air holes.
2. The polluted air passes through the H13 HEPA filter and active carbon filter
and is cleaned in this way.
3. At the top of the product, the clean air is blown out.

User manual

1. Press the power button to turn the product on.
2. The product will now start working and blow briefly in middle speed for 10
seconds to warm up.
3. After warming up, the product will automatically operate in auto mode.
Here, the product adjusts the wind speed itself according to the air quality. If
the air quality is good, the product remains on standby.
4. Press the power button again to start the product.
5. The indicator light will change colour according to the air quality:
Green: <20 PM2.5
Orange: <75 PM2.5
Red: >75 PM2.5
11.