Urbanista MALIBU Benutzeranleitung Seite 5

USER MANUAL
0-30%: Amber LED pulses
30-100%: White LED pulses
100%: Solid white LED
To check the battery level, simply single-press the Power button. The LED
turns amber if the battery level is below 30% and solid white if it exceeds
30%.
AUTOMATIC POWER-OFF
The speaker will automatically power off after 5 minutes of disconnection
or 30 minutes of inactivity while connected. In Power Saving Mode, it will
power off after 15 minutes.
STEREO PAIRING
For enhanced sound, follow these steps to connect two Malibu speakers:
1. Connect Speaker A to a Bluetooth device.
2. Power on Speaker B, but do not connect it to any device.
3. Double-press the Feature button on both speakers.
4. Both speakers' LEDs will flash rapidly, and once connected, turn solid.
5. To stop stereo pairing, double-press the Feature button on either
speaker.
USING THE APP
Enhance your experience with the Urbanista Audio app, available on both
the App Store and Google Play. The app allows you to monitor light charging
performance, personalize sound settings, and customize your speaker.
IP67 WATER AND DUST RESISTANT
IP67 means the device is dust- and waterproof up to 30 minutes in 1 meter
water depth. Important Safety Precaution: To avoid the risk of electric shock,
please do not use your speaker near water when charging with cable.
FACTORY RESET
To reset to factory settings, press the Power button for 10 seconds while
powered off. The LED will begin flashing, and after restarting, the speaker will
automatically enter pairing mode. Remember to remove "Urbanista Malibu"
from your Bluetooth settings before re-pairing.
NEED SUPPORT?
For further assistance and FAQs, please visit www.support.urbanista.com.
(EN)
5