Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Solar Powered LED Floodlight
Item no: 2637994
1 Intended use
The product is a solar powered LED floodlight with integrated motion sensor.
The product has an IP65 ingress protection rating and is protected from dust and low pres-
sure water jets from any direction. The product is suitable for outdoor use. Do not submerge
the product in water.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Solar wall light
■
Bracket
■
2x wall screws
■
2x plastic dowels
■
2x bracket screws
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol warns of hazards that
can lead to personal injury.
This product is constructed accord-
ing to protection class III.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
4
■
4x small washers
■
2x large washers
■
Remote control (batteries not included)
■
Operating instructions
www.conrad.com/downloads
or scan the QR
The symbol warns of dangerous
voltage that can lead to personal in-
jury by electric shock.
5.5 Li-ion battery
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable bat-
tery might cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or
the product into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the re-
chargeable battery first.
5.6 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
5.7 Drilling
When penetrating the surface (example: drilling or inserting fasteners), make
sure no cables or pipes are damaged. Inadvertently penetrating electric cables
causes the life-threatening danger of an electric shock! Check for concealed
wires and pipes before drilling or inserting fasteners.
6 Product overview
1
Solar panel
3
Bracket
5
Light angle adjust (at rear)
7
Light panel tension screws
7 Remote battery
1. Open the battery compartment.
2. Insert 2x 1.5 V AAA batteries matching polarity as shown inside the compartment.
3. Replace the compartment cover.
8 Solar recharge battery
Important:
To maximize charging efficiency, keep the solar panel(s) clean and free from debris.
■
Solar charge the battery under bright sunlight for at least 7 hours:
– Before first use
– After prolonged periods without exposure to sunlight e.g. rain.
9 Choosing a location
Find a location that exposes the solar module to full sunlight to allow the rechargeable bat-
tery to recharge during the day.
Consider the following:
■
The solar panel should be exposed to maximum sunlight. Do not set up the product in
the shade or under any cover.
■
Avoid the direct proximity of other light sources such as yard or streetlights, otherwise
the product will not switch on automatically at nightfall.
■
Avoid locations that are likely to be flooded.
10 Installation
When tilting the light panel, you may need a hex key to adjust both the tension screws.
You can fine tune the lighting angle by:
■
Using the angle adjust dial behind the light panel.
■
Tilting the light panel.
3
1
4
2
5
6
7
2
Main power / mode button
4
Motion sensor / indicator light
6
Light panel
Werbung
