Axis Communications Q86-E Serie Montageanleitung Seite 20

AXIS Q86–E Series
Access the Product
Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on www.axis.com/techsup/
Pan Tilt
The PT functionality is controlled through the network camera. The PT functionality is enabled by
default and the controls will be available from the Live View page in the network camera's web
pages. See the User Manual, available at the product pages at www.axis.com
Access the Camera Unit
To access the camera unit for mounting the SD card or resetting the camera to factory default
settings, remove the two screws and open the top cover.
Mount SD Card
1. Remove the power cable, the network cable and the RX/TX cable.
2. Remove the four screws.
20