Husqvarna LB 146i Bedienungsanleitung Seite 10

• Use this product to cut grass
lawns only. It is not permitted
to use it for other tasks.
• Use personal protective
equipment. Refer to
protective equipment on page
11 .
• Make sure that you know how
to stop the motor quickly in an
emergency.
• Do not operate the product in
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
• Do not operate the product
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
• Make sure that the blade does
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
very high risk that the blade
becomes loose.
• If the blade hits an object or if
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery.
Examine the product for
damages. Repair damages or
10
All manuals and user guides at all-guides.com
Personal
let an authorised service agent
do the repair.
• Never attach the motor brake
handle permanently to the
handle when the motor is
started.
• Put the product on a stable,
flat surface and start it. Make
sure that the blade does not
hit the ground or other objects.
• Always stay behind the
product when you operate it.
• Let all the wheels stay on the
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
• Do not tilt the product when
the motor is started.
• Be careful when you pull the
product rearward.
• Never lift up the product when
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery.
• Do not walk rearward when
you operate the product.
• Stop the motor when you
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
• Do not run with the product
when the motor is started.
1680 - 002 - 13.10.2021