Leckey P Stehständer Gebrauchsanleitung Seite 6

GB
b
2.6
2.6
a
2.6
2.7
2.8
2.7
a
2.8
Flexible Lateral Support Adjustment
The Pronestander flexible lateral supports can be adjusted
in and out by loosening the bolt (a) on the back of the chest
plate. Once this bolt has been loosened, the flexible lateral
supports can be adjusted the required position and once in
position the bolts (a) should be re-tightened securely. The
flexible laterals also have a small amount of height
adjustment. To alter the height loosen the allen bolts (b),
position the laterals as required and then re-tighten the
allen bolts (b) securely. The flexible lateral supports are
secured around the user by tightening the safety strap into
position. Fasten the safety strap immediately.
Adjusting the Tray
The tray can be height and angle adjusted by loosening the
bolts (a) on the tray poles, adjusting to the required position
and then re-tightening the bolts (a) securely. The position
of the tray can also be altered in relation to the chest plate.
One of three positions can be selected to help facilitate
good hand function. The tray will come complete with a
tray cover and bowl meaning that you can use both the tray
with a flat cover and use the bowl for play activities.
Attaching the Pelvic Band
The pelvic band should be attached to the user first, again if
practical on a mat. The pelvic straps are attached around
the user's pelvis and then when the user is secured into
the frame (by their feet and chest) the longer straps are
slipped through the D-Rings on the pelvic plate and secured
firmly behind the user with Velcro on the belt. To ensure
that you can easily identify the strap that goes around the
user and the one that attaches to the frame, a Leckey label
is sewn on to the one that goes around the frame.