Leckey P Stehständer Gebrauchsanleitung Seite 5

a
a
a
a
2.2 Adjusting the Pelvic Plate
2.2
The height of the pelvic plate is set to the equivalent
distance between the top of the user's pelvis and their feet.
The pelvic plate is adjusted by loosening the bolt, (a) on
each side of the plate and sliding the padded plate into the
required position. Once the required position is obtained,
the bolts (a) should be re-tightened securely.
2.3 Adjusting the Knee Plate
The height of the knee plate is adjusted by loosening the
bolts (a) on each side of the knee plate, sliding the knee
plate into the required position and then re-tightening the
bolts (a) securely.
2.3
2.4 Adjusting the Knee Cups
The knee cups can be moved from left to right and each
knee cup is fixed by a single bolt at the back of the knee
plate. To adjust the knee cup loosen the bolt (a), position
the knee cup as required, then re-tighten the bolt (a)
securely.
MINOR ADJUSTMENTS TO THE KNEE AND PELVIC PLATE
MAY BE MADE DURING USE
2.5 Adjusting the Sandals and Footplates
2.4
The Pronestander footplate is split and hinged at the back
of the footboard. This allows the sandals to be adjusted
more easily and can facilitate transfer from a seating
position, to a wheelchair for example.
Each sandal is attached to the individual footplate with
Velcro and a single fixing bolt. If you wish to rotate the
sandal laterally, simply loosen the bolt (a), place in the
required position and then re-tighten the bolt securely.
2.5