Changhong LED39D2200DS Bedienungsanleitung Seite 16

All manuals and user guides at all-guides.com
Menu Operation
Configuring the Picture Menu
• Picture Mode
You can select the type of picture
which best corresponds to your
viewing requirements.
Brightness, Contrast, Sharpness,
Color and Tint (NTSC) can be
adjusted when the picture mode is
set to User.
The manufacture's
recommendation mode is
Home.
• Brightness
Adjusts the base level of the signal in the picture.
• Contrast
Adjusts the signal level between black and white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the
picture.
• Color
Adjusts intensity of all colors.
• Tint (Only in the NTSC mode)
Adjusts the balance between red and green levels.
• Color Temp
Press the ENTER button to access the submenu.
Select the color temperature of the picture, and press the ▲/▼ button to select the
Standard, Cool, Warm and User.
R Gain, G Gain and B Gain can be adjusted when the Mode is set to User.
• Aspect Ratio
You can select the picture size which best corresponds to your viewing requirements.
• NR
Reduces screen noise without compromising video quality.
• Backlight
To control the brightness of the screen, adjust the brightness of panel.
• Energy Saving
Energy Saving can be adjusted when the Picture Mode is set to Home.
Switch the Energy Saving On or Off.
• PC Setup (In PC mode)
Press the ENTER button to access the submenu.
Auto Adjust: Adjust the image automatically.
H Position: Centre the image by moving it left or right.
V Position: Centre the image by moving it up or down.
Phase: Minimize horizontal distortion.
Clock: Minimize vertical stripes in the screen image.
13