Kenwood KD-48F Bedienungsanleitung Seite 7

Assembly
Motor pulley
Drive belt
Rock lever
Stylus cover
Turntable platter
Auto size selector
B Assembly
1. Engage the drive belt with the motor pulley.
е Set the turntable platter carefully on the center spindle.
Using the ribbon tape, engage the drive belt with the mo-
tor pulley as shown. Remove the ribbon tape.
2. Place the turntable sheet on the turntable platter so that
the detection notches of the auto size selector protrude
from the holes in the turntable sheet.
3. Remove the vinyl tie holding the tonearm to the arm rest,
and unlock the lock lever in the direction of the arrow.
4. Raise the stylus cover in the direction of the arrow.