Hama SL 102 Bedienungsanleitung Seite 4

G Operating instruction
Controls (Fig. 1)
1. Touch control panel
2. USB port
3. DC socket (power supply unit)
4. Touch lamp arm
Thank you for choosing a Hama product.
Take your time and read the following instructions and infor-
mation completely. Please keep these instructions in a safe
place for future reference. If you sell the device, please pass
these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw
your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• Desk Lamp
• Power supply unit
• These operating instructions
3. Safety Notes
• Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
• This product is not intended for use by persons, including
children, with limited physical, sensory or mental abilities
or lacking in experience or knowledge, unless they are
supervised by a person responsible for their safety or have
been instructed on how to use the product.
• The product may only be operated with the type of power
supply network described on the name plate.
• Only connect the product to a socket that has been ap-
proved for the device. The electrical socket must always be
easily accessible.
• If you will not be using the product for a long period of time,
disconnect it from mains power.
• Do not use the product if the AC adapter, adapter cable or
power cable is damaged.
• Do not drop the product and do not expose it to any major
shocks.
• Do not attempt to service or repair the product yourself.
Leave any and all service work to quali ed experts.
• Do not open the device or continue to operate it if it
becomes damaged.
2
Warning
Never look straight into the light source and do
not aim its beam of light straight into the eyes
of other people or animals. This could damage
your/their eyes.
• Please note that lamps (even LEDs) generate heat and
may become hot. Always let the lamp cool down for a few
minutes before touching it.
• Do not place any objects or hang objects (for example,
decorative material) on the LED desk lamp. Doing so could
create a re hazard.
• Only use the device with the included LED ballast unit (pow-
er supply unit). Normal power supply units are not suitable
for the lamp.
• The light source of this light is not replaceable; when the
light source has reached the end of its life, you need to
replace the entire light.
• The lamp arm can be tilted 90-0° for transport. In continual
use, the lamp arm should not be tilted more than 45° (see
Pic 2).
• The lamp is intended only for private household and o ce
use. Due to the touch function, the lamp is not suitable
for use on metal surfaces (for example, iron, aluminium,
copper).
• Do not place any electronic objects (such as smartphones,
tablets, cables) onto the touch control panel.
• Do not touch the touch control panels with wet hands.
4. Product features
The desk lamp features different colour temperatures (warm
white to daylight) so that you can always nd the appropriate
light for your needs. The virtually icker-free light protects your
eyes and prevents fatigue. The amount of light is continuously
adjustable to suit your brightness requirements. The lamp can
be adjusted for optimum positioning using swivel and hinge
joints. Touch buttons ensure ergonomic and simple operation.
In addition, a USB port is available for charging a USB terminal
device, such as a smartphone or tablet.
5. Getting started and operation
5.1 Connection
Connect the supplied power supply unit to the DC socket on
the desk lamp. Place the lamp on a stable, even, horizontal
surface and adjust to your liking. Connect the power supply
unit to an easily accessible mains socket.
5.2 Settings
Switch on/off
Tap on the touch control panel (1) twice in quick succession to
switch on or off.