Kesser K-GWK-10 Bedienungsanleitung Seite 8

8
Before use
Before using the mulled wine warmer for the first time, wash the inside of the container with
hot soapy water. Rinse with clean water and dry the container.
Main components
1. lid
2. handle of the lid
3. handle
4. container
5. thermostat disc
6. on/off button
7. red indicator light
8. green indicator light
9. base
10. tap
11. level indicator
Use
Remove the lid of the mulled wine warmer by turning it anticlockwise.
Fill with mulled wine. The liquid level should be between the MIN and MAX marks. Replace the
lid and turn it clockwise to lock it.
Switch the appliance on with the on/off button (6) and turn the thermostat control (5) to the
desired temperature.
The red indicator light (7) lights up while the mulled wine is being heated. When the set
temperature is reached, the red control light goes out and the green control light (8) lights up
to indicate that the mulled wine warmer is maintaining the temperature.
Caution. A built-in thermal fuse automatically switches the mulled wine warmer off if it
overheats. When it has cooled down completely, it can be switched on again.
Cleaning and care
Let the mulled wine and the mulled wine warmer cool down before emptying, moving or
cleaning them. Unplug the appliance from the mains. Empty it.
Wash the inside of the container with hot soapy water after each use. Rinse the container
with clean water and dry it.
Wipe the outside of the mulled wine warmer regularly with a well-wrung cloth and then dry it
with a soft, dry cloth.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany