Chauvet Professional onAir IP Montageanleitung Seite 8

EN
Main Level
Color User
Calibration Calibration
LED
Frequency
Fan Mode
Receive On/
Off
Wireless Receive
Setting Reset
Wireless To
DMX
Back Light
Universe
Start Channel
Ethernet
Setting
IP Address
Ethernet To
DMX
Fixture Hours
LED Hours
Information
Disp Version
Drv Version
Net Version
UID
Only This Unit
Upgrade
Multiple Units
Firmware
Other Fixture Type
Factory
Reset
7
QUICK REFERENCE GUIDE
Programming Levels
Off
Red
Green
<125–255>
Blue
White
Factory Calibration
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Auto
On
Off
Silent
Off
On
No
Yes
No
Yes
10S
30S
2Min
Always On
000–255 (Art-net™)
001–256 (sACN)
001–512
2
10 000–255 . 000–255 . 000–255 Sets the IP address
239
No
Yes
<_ _ _ _ _H>
<_ _ _ _ _H>
<V_._ _>
<V_._ _>
<V_._ _>
21A40139_ _ _ _
_ _ _ _ _ _.CHL
_ _ _ _ _ _.CHL
_ _ _ _ _ _.CHL
No
Yes
Description
Color calibration off
Sets maximum red LED value
Sets maximum green LED value
Sets maximum blue LED value
Sets maximum white LED value
Color calibration set by factory
Sets the Pulse Width Modulation frequency
Sets the fan to auto mode
Sets the fan to always on
Sets the fan to always off
Sets the fan to silent
Enables/disables CRMX™
Resets wireless receiver
Enables/disables wireless to DMX
Turns off display after 10 seconds of inactivity
Turns off display after 30 seconds
Turns off display after 2 minutes of
Display always on
Sets the Art-Net™ or sACN universe
Sets the starting channel
Enables/disables Ethernet to DMX
Shows total hours the product has been
powered on
Shows total hours the LEDs have been
powered on
Shows current display version
Shows current driver version
Shows current net version
Shows product UID
Selects an update file for this product, or
shows "No such file!"
...
Selects an update file for this and connected
onAir IP Panel 2 products, or shows
...
"No such file!"
Selects an update file for other connected
products, or shows "No such file!"
...
Resets the product to factory default settings
onAir IP Panel 1 QRG Rev. 7