Settings And Adjustments - Life & Home Amara Gebrauchsanweisung

Settings and adjustments

For additional comfort, you can adjust the
Amara to suit your own requirements. The
settings given below are easy to implement.
Your dealer can carry out the other settings
and adjustments, such as adjusting the seat
height, the ride characteristics and fixing the
ankle angle, for you.
Adjusting the push handle
1. Loosen the handle by one turn.
2. Adjust the handle to the required height.
3. Retighten the handle.
The handles cannot be removed.
Adjusting the armrests
1. Undo the socket screw (A).
2. Adjust the armrest to the required height.
3. Retighten the socket screw.
Adjusting the legrest
1. Undo the socket screw (A) by one turn.
2. Set the legrest to the required lower leg
length.
NB: Make sure the legrest is at least 5 cm off
the floor.
3. Retighten the socket screw.
GB10
A
A
1
2
Adjusting the seat height
You can adjust the seat height to different
heights. There are 4 axle holes available for
adjusting the seat height.
A
n Loosen the socket screws (A).
A
n Set the seat height as required.
A
A
n Retighten the socket screws.
n If required, readjust the tyre brakes.
Adjusting the ride characteristics
The ride characteristics of the Amara are
adjustable.
n Loosen the nut (A).
n Set the seat height as required.
n Retighten the socket screws.
A
n Move the wheel and axle plate forwards
n Retighten the nut.
Fixing the ankle hinge
1. Adjust the ankle angle to the required
2. Drill a hole in the hinge.
3. Fix the ankle hinge using the fixing pin
ø 3 mm
3
Settings and adjustments
or backwards (the back axle hole gives
you more stability and the front axle hole
gives you a more comfortable ride; the
ride characteristics change in relation to
the seat depth).
position.
provided.
GB11