Spypoint KIT-12V Bedienungsanleitung Seite 5

8
BATT-12V
To maintain the charge of the battery with a solar panel, connect
the alligator clips from the solar panel in the battery. Exact
polarity must be followed (red = +, black = - ). (See image
below)
Make sure that the battery is fully charged before plugging in
the solar panel. It will keep the charge of the battery but does
not recharge it.
RED
RED
BLACK
BLACK
12V battery
optionS
To obtain more information on the available options, go to
www.spypoint.com. The following items are the options which
can be added to the KIT-12V and to the BATT-12V.
Solar panel
Solar Panel, SP-12V
Solar panel with adjustable steel mounting
kit. Can be used to maintain recharged
lithium battery directly into compatible
devices. Can also be combined with any
12-volt battery.
12V rechargeable battery and charger,
BATT-12V (for the KIT-12V)
12-volt 7.0Ah rechargeable battery and AC
charger to power the camera.
12v power cable, CB-12ft
(for the BATT-12V)
Power cable with alligator clips at one end
to connect a 12V battery to a camera, 12ft
long.
9