SVBONY SC311 Bedienungsanleitung Seite 10

Precautions for use
When using a mobile device to connect with this product and operate the APP,
please note the following:
－If you are using an purchased TF card with this product SC311 for the first
time, please enter the settings option to format the TF card firstly（The TF
card provided with this product has been formatted before leaving the
factory) to prepare for later video shooting or photo storage.。
－Please allow the APP to access the local photo album on your phone. The
program will automatically create a new "SvbonyAstro" photo album in your
local photo album to store the images you downloaded from the device photo
album to the local photo album on your phone.
－If the image is not clear, please adjust the focus of the external device until
the image is clear;
－If the exposure time exceeds 100ms for video shooting, it is recommended
that the video shooting time be more than 10 minutes. If the time is too short,
it may not be stored.
－There will be a certain delay when adjusting different exposure times. Please
wait for the last exposure time to complete, or switch and refresh again.
UVC mode usage
－Take out the equipment, connect the accessories, remove the lens cover,
install the TF card, and connect your telescope or other external equipment;
－Use the supplied data cable to connect the Type-C end to the device and
the USB end to the PC;
－Open the UVC software on the PC (Sharpcap software can be selected),
select "UVC Camera" to enter the image interface;
－Note: During use in WIFI mode, after switching to UVC mode, the device will
automatically default to UVC mode. If you want to return to WIFI mode, you
need to turn off UVC mode and reconnect the device to return to WIFI mode.
Guidelines for planning photos
－Press the scheduled photo button on the main interface to switch to
scheduled photo mode.
－Click the icon in the upper right corner of the interface to select the number
of planned photos (50, 100, 200 optional)
－Click the icon to select the time interval for each photo taken (1s, 3s, 5s, 10s
optional)
－After making the above selections, return to the main interface and press
the photo button. The device will automatically take photos at fixed intervals
according to the selected time and number of photos until the selected
number of photos is taken;
－Export the captured pictures and use video synthesis software to create
time-lapse videos.
06