Werbung
Start-up
Unpacking and checking the contents of
the shipment
You should retain the original appliance
!
packaging for any future transportation.
• Unpack all components.
Check the contents of the packaging for
any transportation damage.
• Check whether the shipment corre
sponds to the details on the delivery
docket.
• Inform your specialised TERRA dealer
immediately should you detect any
transportation damage or discrepancies
between the packaging contents and
delivery docket.
i
Initial start-up
It takes only a few steps to start up your
appliance for the first time:
42
All manuals and user guides at all-guides.com
•
Select a location for the appliance and
set up the appliance.
• Check the rated voltage and then connect
the appliance to the mains power supply.
• Switch on the appliance.
External devices
If you have also received other devices in
addition to your appliance (e.g. a printer),
these should only be connected following
initial installation. The manner in which
these external devices are connected is
described in the following sections.
Setting up the appliance
Consider the recommendations and safety
instructions when setting up the appliance.
Only place the appliance in its intended
!
operating position (e.g. Perpendicular to
the feet). We recommend you, to place the
unit on a non-slip support. With the variety
of coatings and lacquers used in furniture,
it is possible that the plastic feet cause
damage on the floor. Do not place multiple
devices on top of each other.
Warning: This unit may only be operated
in an upright position.
Exceptions: Mini-ITX-PC and Slim-Desk-
top-PC, when in the Internet /
manufacturer's site described.
The device may only be used on the feet
standing.
Disturbing vibration and noises may be
detected, depending on the location of
your appliance. In order to avoid this, a
minimum clearance of three millimetres
should be maintained to other devices or
objects in the case of housing units without
ventilation surfaces.
Ensure that the appliance is adequately
ventilated. To avoid overheating, the ven-
tilation surfaces on the screen and appli-
ance should not be covered.
Do not expose the appliance to any ex-
treme ambient conditions and protect it
from dust, damp and heat.
EN
43
Werbung
