AGPtek RW1W Bedienungsanleitung Seite 62

AP mode
This camera allows to monitor in a close distance under AP mode even
when there is no WiFi network.
Insert a small clip into the reset hole of the camera and hold for 1-2
seconds. There will be a sound prompt from the camera telling you it is
under AP mode.
1.Enable the WiFi
connection with the
device name begins with
"IPC_"(eg.
IPC_154VGTWV).
2.Open Seecam APP, tap
"+".
60
3.Choosze Add device
through AP hotspot.