AGPtek RW1W Bedienungsanleitung Seite 57

WiFi mode
Note: 1)Please install this camera close to the router for better network connection.
2)If the phone is not connected to the cellular data or WiFi network, you will not be
able to monitor via the camera by simply opening Seecam app.
3)This output of the bulb is 3W, and the bulb is only for decoration. It can not be use as
home lighting.
1.Connect
smartphone to your home
WiFi network, then open
Seecam APP.
your 2.Tap"+". 3.Choose Configure WiFi
to add device.
55