Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Make an appointment to charge
Enter the appointment charging interface, tap the power button once for one hour, and so on, after
selecting the appointment charging time, press and hold for 3 seconds to confirm, the interface pops
up, that is, the setting is complete, if the battery is fully charged, the charger will automatically stop
charging to prevent overcharging
Grounding selection
There are grounding charging and grounding-free charging when entering the interface. Touch the power button
to select and press and hold for 3 seconds, and the interface will pop up, that is, the setting is complete.
Security Warning
Failure to follow instructions may result in danger!
•
Regularly check whether the portable charger has visible damage, there may be an electric shock
hazard when using the damaged product.
•
Make sure that all safety facilities are available at all times and test then regularly to ensure safety.
• If a 'Ground Error' occurs, it must be assumed that the earth wire carries voltage. Please check the
circuit and make sure that there is no high-power available in the whole circuit system.
• Before powering on the device, please confirm that the device is properly grounded to avoid
accidents.
• All metal parts should be insulated to prevent short circuit caused by the touch of the tool with the
metal frame.
• Do not modify, retrofit, or change any part by yourself under any circumstances.
• To ensure a stable service life and operation of the charging cable, operation enviroment should be
kept clean and with constant temperature and humidity. The charging cable must not be used in the
presence of volatile gas or flammable atmosphere.
Please confirm that the input voltage, frequency, circuit breakers and other conditions of the device
have already met the specifications before the device is powered on.
TAMITO SAS
176 avenue charles de gaulles,
92200 Neuilly-sur-seine, FR
service@tamito.fr
CE No: HX220302011118
EN
Werbung
