JATRHG YL-OB102 Benutzerhandbuch Seite 3

Professional specification
Service Life:> 10000 times
Terminal Temperature rise: <50K
Max Working Temperature: -30°C —+ 50°C
Withstand Voltage: 2000V
Shell Material: ABS+PC Alloy
Contact Pin: Copper alloy, silver or nickel plating Vibration Resistance: Meet JDQ 53.3 requirements
About Maintenance
.In order to ensure the normal service life of the charger and reduce the risk, maintenance must be performed within
the specified time; the maintenance of the equipment needs to be completed by professionals, with use of qualified and
safe maintenance tools.
• The product is carefully packed in factory. During transportation, strong impact and bumps should be avoided to prevent
damage to the outer packaging of the product.
• The product should be placed at an ambient temperature of -30°C
The ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, It also should be away
from rain, snow, wind and sand.
1. Connect the power cord
3. Plug into the car
Insulation Resistance: > 1000M 0
Contact Impedance: 0.5m 0
Sealing gasket: rubber or silicon rubber
Inlet cable spec: 3*2.5mrriz(YL-OB102Y) 3*6mrriz(YL-OB101)
Cable diameter: 12(mm) / 0.47(in)
+50°C with a relative humidity of less than 95%.
—
2. Power selection(For the first use)
4. Charging
EN