Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AUX-IN MODE
Connect an external device such as a smartphone or MP3 player to the PSX11BT with a 3.5mm audio cable to
play music from your external device wired (mp3 player and smartphone are not included).
1. Press the power/function key ( ) repeatedly until "AUX" appears in the display.
2. Connect your device to the PSX11BT using a 3.5mm audio cable (audio cable not included).
3. Start playback on your external device.
4. You control the playback on your external device.
5. You control the volume on your external device or the PSX11BT.
Note:
If the basic volume on your external device is set too low, you may not hear any sound from the
PSX11BT. In this case, increase the volume on your external device.
TWS MODE
You can pair two PSX11BT units wirelessly to create a stereo system. TWS mode is only available in Bluetooth
mode. To pair two PSX11BT devices into a TWS system, please follow the steps below.
1. Connect an external Bluetooth device to the PSX11BT. This PSX11BT is now the master device.
2. Switch on the second PSX11BT device and switch to Bluetooth mode.
3. Press and hold the pairing button on the master unit. Now the two units connect automatically and a
sound is emitted to indicate that the units are connected. The master unit will display "tS R" (right
speaker) and the second unit will display "tS L" (left speaker).
4. The following things can be adjusted on both speakers: Equalizer, volume, play, pause, next track,
previous track, super bass and party light mode.
5. To interrupt the TWS function and disconnect the two units, press and hold the Pair button on one of
the units.
6. To disconnect the Bluetooth connection to your external device, briefly press the Pair button once.
24
UK
Werbung
