Inhaltsverzeichnis; General Prescriptions; Safety Prescriptions; Installation Prescriptions - Comunello Automation BORDER 400 Installations- Und Gebrauchsanleitung

CONTENTS
1 GENERAL PRESCRIPTIONS
1.1 Safety prescriptions
1.2 Installation prescriptions
1.3 Operating prescriptions
2 MODELS AND PRODUCT DESCRIPTION
2.1 Description
2.2 Typical installation
3 PRODUCT TECHNICAL SPECIFICATIONS
4 INSTALLATION
4.1 Preliminary checks
4.2 Operating limits
4.3 Preparatory work for installation
4.4 Installing the BORDER barrier system
4.4.1 Installation
4.4.2 Limit stops adjustment
4.4.3 Manual release
5 PREPARATION FOR ELECTRICAL CONNECTIONS
6 TESTING
7 PRODUCT MAINTENANCE
8 SPARE PARTS
9 DISPOSAL OF THE PRODUCT
10 ELECTRONIC CIRCUIT BOARD
10.1 Prescriptions
10.2 Technical characteristics
10.3 Electrical connections
10.4 Functional characteristics
10.5 Programming
11 Warranty

1 GENERAL PRESCRIPTIONS

1.1 SAFETY PRESCRIPTIONS

This installation manual is addressed exclusively
to professionally skilled personnel. Read all the
instructions carefully before starting the installation
procedures. Any operations that are not expressly
set down in these instructions are to be considered
prohibited; improper use may result in damage to
the product and place persons and property at risk.
The manufacturer declines all liability for failure to
observe best technical practices in barrier system
construction and for any possible deformations
that may occur when using the product. Store
this manual in a safe place for future reference.
The design and construction of the devices fitted
on the BORDER model as well as this manual
are in full compliance with statutory legislation. In
consideration of potential hazards that may arise
during the installation and use of BORDER, also
the installation procedures must be carried out in
full compliance with the applicable laws, standards
and regulations; specifically:

1.2 INSTALLATION PRESCRIPTIONS

• Before starting the installation procedures
make sure you have any additional devices and
materials that may be required to complete the
BORDER barrier system in consideration of the
specific application.
• The automation system must not be used until
18
COMUNELLO ®Copyright 2015 - All right reserved
All manuals and user guides at all-guides.com
• Dispose of packaging materials in compliance

1.3 OPERATING PRESCRIPTIONS

• No modifications can be made to any part of
• The parts of the automation system must never
• If liquids penetrate any parts of the automation
• Keep all parts of the BORDER barrier system
• When the system remains unused for a long
• Any operations that require parts of the
• In the case of tripping of circuit breakers or
• If the fault cannot be remedied using the
2 MODELS AND PRODUCTS DESCRIPTION
2.1 DESCRIPTION
Sturdy and easy to install, the BORDER electromechanical barrier system
is suitable for residential, public and industrial applications. Thanks to the
on-board electronic control unit any type of barrier system function can
be programmed.
the transit area has been made safe.
with local regulations.
the product unless specified in this manual.
Unauthorized modifications of the product are
likely to lead to malfunctions. The manufacturer
declines all liability for damage caused by
unauthorized modifications.
be immersed in water or other liquids. During
the installation procedures ensure that no solid
objects or liquids penetrate inside the control
unit or other open devices.
system, disconnect the electrical power supply
immediately and consult technical service; the
use of BORDER in such conditions may give rise
to potentially hazardous situations.
away from heat sources and open flames;
exposure to heat or flames may damage the
devices and cause faults, fire, or hazardous
situations.
time, remove the optional battery and store it
in a dry place to avoid the risk of leakage of
harmful substances.
BORDER barrier system to be opened must be
performed with the control unit and the electrical
power supply disconnected; if the disconnect
device is not clearly visible from where you are
working, attach a warning notice to the effect:
"WARNING - MAINTENANCE IN PROGRESS".
blowing of fuses, find the fault and remedy it
before resetting the circuit breaker or changing
the fuse.
information given in this manual, consult
technical service.