Herunterladen Diese Seite drucken

Chal-Tec DOF Pro10 Bedienungsanleitung Seite 23

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
TROUBLESHOOTING
The smoke detector does not make
any sound during testing.
The alarm signal occurs every 48
seconds, at the same time the red
LED flashes once.
The alarm signal occurs every 48
seconds and the alarm changes to
error mode.
The smoke alarm emits unwanted
sounds, alarms intermittently
or when occupants are cooking,
showering, etc.
The alarm sounds differently than
usual. It starts and stops.
Press the test button for at least 5
seconds.
Remove the smoke detector from
the holder. Check that the battery is
connected correctly.
Clean the smoke detector.
If the fault persists, contact your
dealer during the warranty period
or replace the detector if your
warranty has expired.
The battery is almost empty. Replace
the battery.
Clean the smoke detector.
If the error persists, contact your
dealer during the warranty period
or replace the detector if your
warranty has expired.
Press the test button to stop the
alarm.
Clean the smoke alarm (see the
MAINTENANCE chapter).
Move the smoke alarm to a new
location and press the test button.
Clean the smoke alarm (see chapter
MAINTENANCE).
Contact the manufacturer.
If the warranty for the device has
expired, replace the smoke alarm
device with a new one.
EN
23

Werbung

loading

Verwandte Produkte für Chal-Tec DOF Pro10