Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dockingstation - Warntafel - Anprallkissen
ENGLISH
2.5.8
Connection of docking station / crash absorber
CAUTION!
Only use suitable lifting and load equipment
mounting - safety - load table!
Use a suitable truck (e.g. forklift
illustration) for mounting the crash absorber.
Using lifting straps, round slings, sling chains or ropes and tongs is not permitted!
Required assembly material:
and
· 10 x screws M20x40 with corresponding washers and spring washers
· 4 x dirt covers
Mount the crash absorber on the lowered mounting plate of the docking station with the enclosed as-
sembly material
illustration. Use a suitable industrial truck (e.g. forklift or similar) to mount the crash
absorber. The general tightening torques apply.
Finally, the dirt covers are glued to the flow openings of the crash absorber.
50
297134-12-DE-EN_2023-02
© 2023 Adolf Nissen Elektrobau GmbH + Co. KG
Werbung
