Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dockingstation - Warntafel - Anprallkissen
ENGLISH
2.5.4
Connection of truck / truck mounting parts
Park and secure the truck (towing vehicle) in a suitable manner before starting work.
During assembly, pay attention to the distance C (
the ground in order to determine the optimum insertion height of the crash absorber! The truck moun-
ting parts must be mounted at a height between 295mm (min.) and 395mm (max.).
Quantity
20 x (min.)
40 x
20 x
* not included in delivery
(1)
the individual length of the screws depends on the vehicle dimensions
NOTE!
The truck mounting plates
100mm) per mounting plate!
We recommend using two lock washers for each bolt-nut combination.
WARNING!
© 2023 Adolf Nissen Elektrobau GmbH + Co. KG
Connecting elements* position
Hexagon head screw with shank M14 x
Lock washer, toothed on both sides for screws up to
strength class 10.9
Nut with non-metallic clamping part M14 DIN 985 min.10, galvanized
Individual drillings on the truck and screw connections must always be carried out professionally!
A
must be screwed with at least 10 hexagon head screws (screw distance
Carry out an individual strength verification (e.g. according to VDI2230)! Take care of the installation
C
height
of the crash absorber
297134-12-DE-EN_2023-02
assembly) between the lower hole (hole axis) and
A
(truck frame)
(1)
DIN931 min.10.9
assembly!
Tightening
torque
145Nm
45
Werbung
