habitat et jardin RELX4 1421 100152 Montageanleitung Seite 13

9. Screw the handle (14) on the front panel (13) - attach the panel
by inserting its two hooks into the holes on the bottom plate.Hook
the chain (15) to the hole in the control box,then close the panel
to the middle plate - the panel is attached by the magnets.
Tips:the chain can hole the panel while operating the control.
10. Connect gas hose (Not supplied) to the LPG
cyliner (Not supplied).
Attach regulator (Not supplier) to cylinder.
Tighten securely.
Move cylinder to the plate of base assembly.
Completed