Technische Daten - Specifications - Team CB3215 Bedienungsanleitung

English
4 - DTMF Menu
01 - DTMF : programming DTMF call 1-16;
1. Select the DTMF call (1-16) to be edited.
2. Push the rotary channel selector (10) until the editing screen opens.
3. Edit the DTMF call.
> The code can contain a maximum of 16 digits. The active digit is high-
lighted in yellow.
> Make your selection (0-9 / A-D / * / #) with the rotary channel selector (10).
> Push the rotary channel selector (10) to advance to the next digit.
02 - SND-T : DTMF Transmit Time; 10-500 ms in 10 ms-steps
03 - FIR-T : First Digit Time (duration of first tone); 0-1000 ms in 100 ms-steps
04 - PRE-T : pre-time, duration between push of PTT key and transmission of the
DTMF call; 100-2500 ms in 100 ms-steps
05 - DELAY : delay upon use of DTMF digits * and #; 0-1000 ms in 100 ms-steps
06 - D-FUN : digit time of letter D ;D (Off) / 1-16 s
07 - DISP : DTMF call visible in own display; On / Off
5- Key Menu
There are 18 available functions that are assigned to the 6 triple-mode function keys P1-6.
The function key assignment can be changed in the key menu.
Activate the function key P1-P6 that you would like to change by pushing it.
Every key has three functions assigned. You automatically start on the first level. Make your
selection with the the rotary channel selector (10) or the Up/Down keys of the microphone.
To advance to the next level push the rotary channel selector (10). The changes are auto-
matically changed after a few seconds.
Preset of the function keys P1-6:
key function 1
PF1 MOD
PF2 RFG
PF3 EMG
PF4 TSQ
PF5 SPL
PF6 5k
28
function 2 function 3
POW NB
DSP RB
MEM HIC
BND VOL
DW SQL
CAL SCA

Technische Daten - Specifications

ALLGEMEIN / GENERAL
Modulation / modulation
Frequenz Bereich / frequency range
Frequenz Toleranz / frequency tolerance
Eingangsspannung / input voltage
Maße / dimensions (in mm)
Gewicht /weight
Frequenz Kontrolle / frequency control
Betriebstemperatur / operating temperature
Stromverbrauch / current consumption
Antennen Anschluss / antenna connection
SENDER / TRANSMITTER
Ausgangsleistung / output power
Sende-Interferenz / transmission interference
Frequenz Ansprache / frequency response
mod. Signalverzerrung / mod. signal distortion
Ausgang Impedanz / output impedance
EMPFÄNGER / RECEIVER
Empfindlichkeit / sensitivity
Spiegelselektion / image rejection
Nachbarkanalunterdrückung /
adjacent channel rejection
IF Frequenzen / frequencies
Auto Gain Control (AGC)
Rauschunterdrückung / squelch
Audio Ausgangsleistung / audio output power
Frequenzansprache / frequency response
English
AM/FM
CB : 26,565 ~ 27,99125MHz (FM)
26,965 ~ 27,405MHz (AM)
HAM : 28 - 29,695 MHz (AM/FM)
±5.0 ppm
12/24 V
(B/w) 124 x (T/d) 163 x (H/h) 39 mm
~. 670 g
PLL Synthesizer
-20° C bis +55° C
Senden/transmit : 2 A max.
Emfang/reception: 0,3 A (squelch)
VOL max : 0,8 A
UHF, SO-239
CB : 4 W (FM/AM)
HAM : 4/8/15 W (AM/FM)
> 4 nW (-54dBm)
300-3000 Hz
> 5%
50 Ohms
> 1uV für 10dB (S+N)/N
70dB
60dB
1. 10.695 MHz
2. 455 kHz
> 10dB / 10-50000 uV
> 1 uV
3 W / 8 Ohm
300-3000 Hz
29