Werbung
2.10
2.10 Driver Installation Guide
2.10
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
2.10
2.10
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.11
2.11 Installing Windows
2.11
Installing Windows
Installing Windows
Installing Windows
2.11
2.11
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit / XP / XP 64-bit With RAID Functions
64-bit / XP / XP 64-bit With RAID Functions
64-bit / XP / XP 64-bit With RAID Functions
64-bit / XP / XP 64-bit With RAID Functions
64-bit / XP / XP 64-bit With RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
your SATA / SATAII HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
Please be noted that currently SATA3 connectors do not support RAID
functions. If you want to use RAID functions, please use SATAII
connectors.
2.12
2.12
2.12
2.12 Installing Windows
2.12
Installing Windows
Installing Windows
Installing Windows
Installing Windows
Vista
Vista
Vista
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
Vista
Vista
TM
TM
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
TM
TM
TM
If you want to install Windows
on your SATAII / SATA3 HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
Functions
Functions
Functions
Functions
Functions
If you want to install Windows
RAID functions, please follow below steps.
Using SATAII / SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A.
Enter UEFI SETUP UTILITY
Configuration.
B.
Set the "SATA Mode" option to [IDE] for SATAII HDDs.
Set the "ASM1061 SATA3 Operation Mode" option to [IDE] for SATA3
HDDs.
STEP 2: Install Windows
2 8
2 8
2 8
2 8
2 8
ASRock
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
® ® ® ® ®
®
7 / 7 64-bit / Vista
TM
/ Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
® ® ® ® ®
®
7 / 7 64-bit / Vista
TM
/ Vista
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
® ® ® ® ®
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
®
XP / XP 64-bit on your SATAII / SATA3 HDDs without
Advanced screen
®
XP / XP 64-bit OS on your system.
880GMH/U3S3
Motherboard
/ / / / /
TM
TM
TM
TM
TM
TM
64-bit / XP / XP 64-bit on
/ / / / /
TM
TM
TM
TM
TM
TM
64-bit / XP / XP 64-bit OS
Storage
Werbung
