Herunterladen Diese Seite drucken

SCANCOOL SD 459 BE Bedienungsanleitung Seite 13

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

digital controller by setting a higher temper-
ature.
DRAIN TRAY
Defrosting is performed automatically and
drain water is collected in the drain tray.
Water is in the drain tray is evaporated au-
tomatically. In humidity, large amount of
water in the drain tray, so please throw
away drain water once a day.
EFFICIENT USE
Please follow the below instruction, you
could save energy.
To prevent cold air from escaping, open and
close the door quickly and keep the door
opened for as short a time as possible.
Please install the unit in the place which is
well-ventilated.
SHELF HEIGTH ADJUSTMENT
The shelf height can be adjusted.
Arrange the shelves in accordance with the
dimensions of the items to be placed in the
cooler.
Checks
In case the unit shows operating problems,
check the following prior to caIling the au-
thorized service company:
SYMPTOMS
The unit is not operating
• Faulty electrical contact
• Poor electrical power
• Thermostat setting II O"
-
Verify electricaI connections
-
Check the power connection and electri-
caI outlet
-
Change the thermostat setting to a
higher number
Not reaching desired temperature
• Unit is exposed to direct sunlight
• Thermostat is not properly adjusted
• Clogger condenser
• Blocked grills
• Door not properly closed
• Products poorly distributed or excess
product load
-
Relocate the unit to as had ed area
-
Adjust the thermostat setting to a
higher number
-
Review Maintenance instructions Iisted
in the manuaI
-
Clean the grills of any debris collected
-
Check the Ieveling of the unit and door
seaI
-
Redistribute the product load according
start instructions
For Models with electronic temperature
controller, indicates E0 or E1
-
Unplug the unit from the outlet. lf the
error continues, contact an authorized
service technician
Water on the floor
The unit is not properly level
Friction with other objects
Drain hose is outside of the drain pan
-
Level the unit following the installation
instructions
-
Move the unit and avoid contact with
other objects
-
Locate the hose in the drain pan

Werbung

loading

Diese Anleitung auch für:

Sd 809 be