EISELE VM/U 1541 Betriebsanleitung Seite 91

English
25.3
Removal of the vertical pump
Remove the vertical pump as follows:
• Switch off vertical pump.
Disconnect the vertical pump from the power supply if required. Disconnect electrical
•
connections and unhook the connection cable.
Ensure that the connection cable is fully disconnected from all current and voltage at all poles.
•
Suspend the vertical pump with lifting gear on suspension points.
•
Cover the shaft opening after removing the vertical pump.
•
25.4
Disposal
After decommissioning, all components are to be handled properly and disposed of properly in
accordance with the applicable local regulations for waste disposal or recycling.
The user is responsible for the disposal.
Franz Eisele u. Söhne GmbH & Co. KG
Pumpen- und Maschinenfabrik
Hauptstraße 2-4
D-72488 Sigmaringen
Tel: +49 (0) 7571/109-0
Fax: +49 (0) 7571/109-88
info@eisele.de
www.eisele.de
91 / 235
37967