Nave 5301661 Bedienungsanleitung Seite 10

Operation
Epileptic seizure
A small percentage (approximately 1 person in 4,000) of the population may experience epileptic seizures
while viewing flashing lights and patterns.
▪
Never look directly into the LED diodes of this product.
▪
If there is any sign of an epileptic seizure, turn off the product.
Non-compliance with this instruction can cause serious or fatal injury and damage to property.
Damage to eyes
▪
Never look directly into the LED diodes of this product.
Non-compliance with these instructions can cause personal injury or damage to property.
Remote control unit
5301661_Manual_16837_02_V1.docx
WARNING
CAUTION
The remote control works with a button battery, which is included in the package.
The remote control saves your last setting (memory function). When switched on
again, the last setting is used.
The remote control buttons are divided into four sections.
Buttons
▪
On/off button
In dynamic pattern mode, you can use these buttons to adjust the speed. In static
mode, these buttons are used to adjust the brightness.
▪
Brightness (in static mode) / Speed (in dynamic mode)
RGB color buttons
Adjust the light color (different shades) with the buttons.
▪
R button: red, light red, orange, light orange, yellow
▪
G button: green, turquoise, light blue, medium blue, blue
▪
B button: Dark blue, blue-violet, violet, pink
▪
W button: warm white
Dynamic Mode
▪
FLASH: red, green, blue continuous
▪
STROBE: Multi-color stream (RGBW rolling)
▪
FADE: from light to dark (RGBW continuous)
▪
SMOOTH: flashing
10 / 42