Attaching The Mount; Connecting To Power - iOttie Auto Sense 2 Bedienungsanleitung

02 Installation

Attaching the Mount

1. Connect the mount cradle
to the ball joint, and tighten
the cradle knob.
2. Push the mount all the
way onto the air vent
blades.
3. Adjust the rotating
support so it is facing
down.
8 EN

Connecting to Power

1. Plug the included USB-C
cable into the USB port
located on the back of the
mount cradle.
2. Connect the USB-C cable to your vehicle's USB-C port or
auxiliary power outlet via a 20W adapter. (Power adapter
not included.)
Note: If connecting directly to your vehicle's USB-C port, charging
speeds may be affected. For the fastest charge, we recommend
connecting to the auxiliary power outlet via a 20W adapter.
9