Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The remote control does not work
Loud hum or noise
The unit does not respond when pres-
sing any buttons
No sound
I can't find the BT name of this unit on
my BT device for BT pairing
The unit switches off automatically du-
ring playing
22
Trouble Shooting
•
Use the remote control near to the unit.
•
Point the remote control at the remote control sensor on
the unit.
•
Replace the batteries in the remote control with new ones.
•
Remove any obstacles between the remote control and
the unit.
•
Maybe the plugs and sockets are dirty. Wipe them with a
cloth slightly moistened with an appropriate non-abrasive
cleaning solution.
The unit may freeze up during use. Switch off and then switch on
the unit again at the mains socket to reset it.
•
Make sure that the unit is not muted. Press MUTE or VOL +
to resume normal listening.
•
Ensure that the audio setting of the input source (e.g. TV,
game console, DVD player, etc.) is set to PCM mode while
using Optical connection.
•
Ensure that the unit is switched on.
•
Ensure that the BT function is activated on your BT device.
•
The unit has a BT function that can receive a signal within
8 metres. Keep a distance within 8 metres both devices.
Please increase the volume level on your input source player
like DVD player / TV etc.
Werbung
