Setting Up The Frame - RBSports 34508 Montage-, Bedienungsund Trainingsanleitung

Setting up the frame

You need 20 steel tubes in different
shapes and sizes. Parts with the same
part number are exactly identical and
can be attached interchangeably. In
order to connect individual tubes, insert
the narrow end of one tube into the
wider end of the other. The parts are
called "connecting points".
Step 1:
Lay all the frame parts down in a circle.
Step 2:
On each base part (4) place two extensi-
ons (5) and screw these on with 8 screws.
Step 3:
Insert all circular segments with leg
sockets (3) into each other and screw
them in with 8 screws (23).
Step 4:
Now place the circular segments with leg
sockets (3) on the base parts (4) with the
extensions (5).
The tool included to suitable in the
pre-assembly stage. A professional
tool is needed for setup.
1
Assembling the trampoline
2 a
(3) circular segment with
leg socket count 8
(4) base part count 4 2 b
(5) vertikal extension
for the legs count 8
3
4
(5)
(4)
two holes
later net post fastener
(5)
screw (23)
(4)
(23)
(3)
Trampoline Trampolin 25