Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
RF-WM-200 2.4 GHz + Bluetooth Wireless
Mouse
Item no: 2527476
1 Operating Instructions for download
Use the link
www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
This item is intended to be used as a wireless mouse.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
Android™ is a trademark of Google LLC.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers
Forum.
3 Delivery contents
■
Mouse
■
USB-C® dongle
■
USB-A dongle
■
USB-C® to USB-A charging cable
■
Operating instructions
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Never operate the product in direct proximity of strong magnetic or electromagnetic fields
or transmitter aerials or HF generators. Doing so can prevent the product from function-
ing properly.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
3
(alternatively scan the QR code) to download the
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Li-ion battery
■
The rechargeable battery is permanently built into the product and cannot be replaced.
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable bat-
tery might cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or
the product into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the re-
chargeable battery first.
■
Never charge the rechargeable battery of the product unattended.
■
When charging, place the product on a surface that is not heat-sensitive. It is normal that
a certain amount of heat is generated during charging.
6 Overview
1
4
2
3
5
6
1
Left button
3
Charging indicator
5
USB-A receiver socket
7
USB-C® receiver
9
Power switch: ON/OFF
11 Indicator: 2.4 GHz / low battery / DPI
13 2.4 GHz and Bluetooth mode / connec-
tion button
7 Charge the battery
Fully charge the battery before using the product for the first time.
The charging indicator flashes when the battery is low.
1. Connect one end of the cable to the USB-C® port on the product.
2. Connect the other end of the charging cable to a suitable power supply.
à
Red LED is off: fully charged.
à
Red LED is permanently on: charging.
8 Pairing the mouse
Only one connection mode can be used at a time.
8.1 Bluetooth connection
Preconditions:
a
Your computer Bluetooth should be switched on and searching for new devices.
1. Slide the mouse power switch ON.
2. Repeatedly press the mode button until the blue Bluetooth indicator blinks slowly.
3. Press and hold the mode button until the blue Bluetooth indicator blinks fast.
à
The pairing mode is activated.
4. Search the Bluetooth device list on your PC/mobile and select "BT5.2 Mouse" to
pair.
à
The indicator goes off after pairing.
8.2 2.4 GHz connection
1. Lift the cover of the mouse and take out the receiver you want to use (USB-A or USB-C).
2. Attach the mouse cover.
3. Slide the mouse power switch ON.
4. (For USB-A receiver) Repeatedly press the mode button until the green indicator blinks
slowly.
5. (For USB-C® receiver) Repeatedly press the mode button until the red indicator blinks
slowly.
9
7
8
2
Scroll wheel
4
Right button
6
USB-C® receiver socket
8
USB-A receiver
10 USB-C® charging port
12 Indicator: Bluetooth / low battery / DPI
10
11
12
13
Werbung
