Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Master/Slave-Operation
The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the device you can find an XLR-jack and an XLR-plug, which can be used for
connecting several devices.
Choose the device which is to control the effects. This device then works as master-device and controls all
other slave-devices, which are to be connected to the master-device via a balanced microphone lead.
Connect the OUT-jack with the IN-plug of the next device.
Note:
After switching on, the slave device will automatically detect whether master data is received or not. If the
data is received, the control LED flashes rapidely. If there is no data received at the DMX-input, the control
LED does not flash.
18/20
00033444.DOC, Version 1.3
Werbung
