Inhaltsverzeichnis
Werbung
How to connect your Soundsync to two Bluetooth headphones /
EN
speakers at same time:
You can play music on both headphones / speakers at same
time. This function is only available in TX mode.
1. Connect your Soundsync to the first Bluetooth headphone / speaker.
Press the multi-function button on your Soundsync and hold for 2 seconds
to enter Bluetooth pairing mode (or double click multi-function button to
activate Bluetooth pairing mode).
2. Place your Soundsync next to the first headphone / speaker and wait
30 secs for connection. Once Soundsync is successfully connected to
the first headphone / speaker, turn o both your Soundsync and the first
headphone / speaker.
3. Turn on the Bluetooth of the second headphone / speaker. Press the
multi-function button on your Soundsync and hold for 2 seconds to enter
Bluetooth pairing mode (or double click multi-function button to activate
Bluetooth pairing mode).
07
4. Place your Soundsync next to the second headphone / speaker and
wait 30 secs for connection. Once Soundsync is successfully connected to
the second headphone / speaker, turn o your Soundsync.
5. Now turn the first headphone / speaker on, wait for 10 to 20 secs, then
turn on your Soundsync, wait for another 30 secs. Both headphones /
speakers will have sound if the connection is successful. For unsuccessful
connection, restart your Soundsync to connect the devices or repeat
above procedures.
Play / pause
1
Note: not available in Transmitter mode(TX).
AUX mode
AUX
SPDIF mode is the default mode, but Soundsync will automatically
switch to AUX mode when 3.5mm audio cable is plugged in.
EN
AUX
08
Werbung
Inhaltsverzeichnis
