Maintenance And Cleaning - SCANGRIP CANVIK BASIC Bedienungsanleitung

MAINTENANCE AND CLEANING

• Always keep the unit clean.
• For all inquiries and spare parts ordering, please include the serial number in all cases.
• Grease the guide spindle if necessary, however at least every six months. Clean the spindle
before greasing.
Recommended grease: graphite grease
REPLACING THE SAFETY PIN, FIG.C.5
• Always keep the unit clean.
• Overloading of the spindle will result in the safety pin breaking. Whilst the drive will
still rotate, the spindle remains in its last position ensuring the spring remains compressed.
Replace the safety pin as described.
• Remove the handgrip from around the drive nut by pulling away from the main unit.
• Drive out the broken pin with a drift pin.
• Align the drilling of the spindle and the drive nut and drive in a new safety pin
(5x26 mm + 3x26 mm, ISO13337).
GUARANTEE
This tool carries a guarantee according to current law.
Subject to change without any notice.
NOTE: Find the latest APPLICATION CAR LIST on our website www.scangrip.com