neno Pressione Bedienungsanleitung Seite 18

Possible cause: The blood pressure result is incorrect.
Solution: Please measure again in the correct way.
6. „Err 4"
Possible cause: The cuff is too loose.
Solution: Check that the cuff is correctly fitted and follow the user manual
on how to use the cuff.
Possible cause: The air cushion of the cuff is ruptured.
Solution: Contact the Neno brand service.
7. „Err 5"
Possible cause: The air duct has detected an obstruction in the early stages
of pressurisation.
Solution: Check if the air duct is clogged or kinked before measuring. Please
take the measurement again.
8. „Err 6"
Possible cause: Signal interference.
Solution: Remove sources of interference, e.g. mobile phones, magnets.
9. „Err 7"
Possible cause: Pressure value exceeds limit.
Solution: Do not touch the cuff during measurement. Do not bend the air
hose during measurement.
Note: If your problem is not solved using the above advice, please contact Neno
brand service. Do not disassemble the device yourself.
11. STORAGE AND CONSERVATION
1. Keep the device out of direct sunlight, extremes of temperature and humidi-
ty, and away from water.
2. Use a dry, soft cloth to clean the unit or, if necessary, use a cloth slightly
dampened with water.
3. Do not use caustic cleaners, benzene, solvent or other volatile liquids to
clean the unit.
4. Do not wash with water or expose the arm cuff to liquid.
5. Remove the batteries from the device if it will not be used for more than
3 months.
6. Disinfection: Recommended disinfectant: 70% isopropanol solution or 75%
(±5%) medical alcohol
12. SPECIFICATION
Display: LED with dimensions of 9.8 x 8.3 cm
Measurement method: oscillometric
Measurement range:
• for pressure: 0-295 mmHg (0-39.3 kPa)
18