Aqua Marin ELKESS-S-30L Aufbauanleitung Seite 30

• All piping parts are BSP 1/2". Wind some white tape at the thread sector of
the inlet pipe (marked blue).
• Fix the safety valve to the inlet pipe and then connect it to the cold water
pipe of the mains.
• Install a water drain pipe to the safety valve to drain away water discharge.
(drain pipe joint outlet - diagram 5).
• Install the drain pipe in a continuously downward direction and in a frost
free environment.
• Connect the hot water pipe (market red) to the outlet pipe.
• Do not overtighten the safety valve and all pipe joints as it may cause
damage to the joints.
• Make sure all pipes are clean before installing the taps and showers.
EN
PIPE CONNECTION
30