AGPtek A30X Bedienungsanleitung Seite 14

Q8: The music player can not search for Bluetooth devices or
can search for Bluetooth devices but keeps showing connection
failure.
1. It is necessary to check if the Bluetooth function of music player
and Bluetooth devices is turned on. If so, please search for pairing.
2. Check if the Bluetooth device is in pairing state, if so, please
disconnect it first, and then re-search for pairing.
3. Check if the music player has been connected to multiple devices
before. If so, you can delete them all, and then reconnect.
4. Check if the Bluetooth version of the Bluetooth headphone or
Bluetooth speaker is above 2.1. Sometimes if you can't find it, it
may be because of incompatibility.
Q9: Frequent disconnection and reconnection after successful
Bluetooth connection.
1. First of all, please confirm the use environment of the music player.
If it is used in close proximity to other 2.4G signal sources or under
obstacles, such as indoor wall penetration, signal base stations,
routers, high-speed rail, subway, etc., it will be interfered by the
signal and thus cause disconnection, and you can try it in an open
place.
2. If the direct distance between the music player and Bluetooth
device exceeds 8-10m, or the distance from the back to the
obstacle exceeds 4-5m, the connection will be disconnected.
Please use the Bluetooth function within the Bluetooth range of
the product.
Specifications
Screen
Housing
Unit Size
Net Weight
Interface Type
2.4" TFT
ABS+Matt Varnish
89 x 54.7 x 11.2mm/3.5 x 2.2 x 0.4in
Thickness: 20mm/0.8in (with back
clip)
about 60g/0.13 lb
Type-C
10