TCL HH132V1 Schnellstartanleitung Seite 24

3. Wi-Fi/WPS indicator
4. LAN/WAN indicator
5. Signal indicator
6. Reset button
7. Nano SIM card slot
8. WPS button
9. Power button
10. Telephone port
(Optional, for HH132V1
only)
11. LAN/WAN port
12. LAN port
13. Power connector
• Blinking blue: WPS connection is available.
• Solid blue: Wi-Fi is enabled.
• Off: WiFi is disabled.
• On: the WAN or LAN port is connected.
• Off: the WAN or LAN port is not connected.
• 1 bar: weak signal strength.
• 2 bars: good signal strength.
• 3 bars: excellent signal strength.
• Off: no signal.
Use a paperclip to press the button for 3 seconds
to reset the device.
Insert a Nano SIM card in the slot.
Press the button for 3 seconds to enable the WPS
function. The WPS function will be automatically
disabled if a WPS connection is not established
within 2 minutes.
• Press for 3 seconds to power off your device.
• Press for 1 second to power on your device.
Connect to a telephone to make or answer calls.
Used to connect to an internet source or wired
devices such as computers or switches.
Used to connect to wired devices such as
computers or switches.
Used to connect to the power adapter.
EN-3