Ninja BN750 Bedienungsanleitung Seite 23

USING THE SINGLE-SERVE CUP
IMPORTANT: Review all warnings on
pages 36-38 before proceeding.
NOTE: Auto-iQ® programs have pauses
and changes in speed throughout
the cycle�
1
Plug in motor base and place on a
clean, dry, level surface such as a
worktop or table�
2
Add ingredients to the Single-Serve
Cup� DO NOT add ingredients past
the MAX LIQUID line�
3
Install the Pro Extractor Blades
Assembly onto the top of the cup� Twist
the lid clockwise until it's sealed tightly�
44 ninjakitchen.eu
4
Turn the cup upside down and install on
the motor base� Align the tabs on the cup
with the slots on the base, then rotate
cup clockwise until it clicks into place�
Once the cup is locked in place, press
the Power button to turn unit on� The
available program buttons will illuminate
and the unit will be ready for use�
5a If using an Auto-iQ® program, fi rst select
the program that best suits your recipe�
The preset feature will automatically
stop at the end of the program� To stop
the unit at any time, press the currently
active program again�
5b If using a manual program, select your
desired speed� Once the incredients
have reached your desired consistency,
press the active button again, and wait
for the unit to come to a complete stop�
6 To remove the cup from the motor
base, turn the cup anti-clockwise and
then lift up�
7
Remove the Pro Extractor Blades
Assembly by twisting the cap anti-
clockwise� DO NOT store blended
contents with Pro Extractor Blades
Assembly attached� Exercise care when
handling the blade assembly, as the
blades are sharp�
8
Turn the unit off by pressing the Power
button� Unplug the unit when fi nished�
Refer to the Care & Maintenance section
for cleaning and storage instructions�
9 To enjoy your drink on the go, place
the Spout Lid onto the Single-Serve
Cup and twist lid clockwise until fi rmly
sealed� For storing ingredients in the
cup, use only the Spout Lid to cover�
45
ninjakitchen.eu