The Descaling Process Is Described In The Following Illustration - Bernstein 1102 PREMIUM Pflegehinweise

THE DESCALING PROCESS IS DESCRIBED IN THE FOLLOWING ILLUSTRATION:

1
Open the lid and the seat.
3
Open the rubber cover.
5
Close the descaling and rubber covers.
2
Open the descaling lid.
4
Fill in descaling agent.
Dosage: about 150 ml.
6
Close the lid and the seat.
The descaling process is then started.
During the descaling process, you can use the
toilet continue to use without shower function.
The process takes about half an hour. During this
time, the LED on the rotary knob flashes.
Once the LED stops blinking and lights up again,
and with a long „BI" warning tone, the shower
function is restored operational.
NOTE:
At this point
water will flow
out of the nozzle.
9